【進口高壓電磁閥】

德國Ryan進口高壓普通電磁閥參數:

High pressure common solenoid valves parameters:

原理結構：分步兩次直動導向活塞式

Principle structure: by two straight moving direction piston

工作環境溫度：-20-+50℃、-40-+80℃

Work environment temperature:-20-+ 50 ℃,-40-+ 80 ℃

線圈工作溫度：<+50℃、<+85℃

Coil working temperature: + 50 ℃, < < + 85 ℃

控制方式：常閉、常開

Control mode: closed, often open

國際標準電壓：AC（380、240、220、24）V、DC（110、24）V

International standard voltage: AC (380, 240, 220, 24) V, DC (110, 24) V

流通流體介質：水、氣、油等

Circulation fluid medium: water, gas, oil, etc

流通流體溫度：<-40℃、<-20℃、<+60℃、<+120℃、<+200℃、<+240℃、<+300℃

Circulation fluid temperature: <-40 ℃, 20 ℃, < <-+ 60 ℃ and + 120 ℃ < < + 200 ℃, 240 ℃, < + + 300 ℃,

流通流體壓力：50bar——1600bar

Circulation fluid pressure: 50 bar-1600 bar

閥體材質：不銹鋼（304、316、316L）

Body materials: stainless steel (304, 316, 316 L)

閥體連接方式:螺紋（內螺紋、外螺紋）

The valve body connection mode: thread (threaded, outer thread)

線圈連接方式：鐵罩三芯雙護套電纜（引線式、封閉式）

Coil connection mode: iron cover three core double sheath cable (lead type, enclosed)

密封材質性能：耐溫、耐壓、耐磨、防腐

Sealing material performance: heat resistance, compression, wear resistance, corrosion

泄漏量：零

Leakage: 0

密封結構：圓弧錐線與錐面密封

Sealing structure: circular cone line and cone seal

性能特點：通用性廣、靈敏性高、嚴密性強、壽命性長

Characteristics: versatility the wide, high sensitivity, strong, long service life of rigor

工作范圍：給水排水、醫療、食品、冶金、石油化工、煙草、消防設備、樓宇自控、電力設備、

紡織、包裝設備、船舶工業、清洗設備、干燥設備、灌裝計量等

Work scope: water, medical, food, metallurgy, petroleum chemical industry, tobacco, fire fighting equipment, building automation, electric power equipment,Textile, packing equipment, shipbuilding industry, cleaning equipment, drying equipment, filling measurement, etc

注解：1、流體中若含有雜質，電磁閥進端必須安裝過濾閥（30——80目/寸），且無凝固及結晶象。

2、電磁閥安裝方位必須水平安裝。

Note: 1, if fluid containing impurities, electromagnetic valve must be installed into the terminal filtration valve (30-80 mesh/inch), and have no the solidification and crystal elephant.

2, the electromagnetic valve installation position must be installed horizontally.